Have a Linksys router which has a built-in USB port (which I have a USB drive plugged into). This port is accessible via SMB at \\readyshare\USB_Storage. No username or password - all machines connected to this router can access it with no problem.
I'm trying to set up my H625cdw to scan to this location. I put "readyshare" in "Server Address", "USB_Storage" in "Share Name", and port 139.
When I try to scan to this, I get error 031-548 "Failed to connect to SMB server".
I've been trying variations on settings, and found that when I put "USB_Storage\" (with the slash) in "Share Name", I get a different error (031-522 "Login authentication issue"). But there's no username/password. When I set a username/password (in the router settings and on the printer), I get the same error.
I've tried port 445, too -same result.
All other machines on the network see this SMB share with no issue. What could be preventing the printer from seeing it?
I'm just a consumer with a stupidly large laser printer at home - no servers or activedirectory or anything...
(I should note that this is my second H625cdw. I had one before that was set up and working properly, but a lightning strike took out my router and printer. I recall spending hours screwing around with these SMB settings the first time around, and eventually got it to work after some non-obvious tweaking, but I can't seem to get it working, this time. I don't think it has to do with the router, though, as the SMB share is accessible to all the computers...)
